22.2V 1800mAh 120C 6S FPV U2 LiPo Battery

High-Output 120C Continuous Discharge: Engineered for aggressive 6S FPV freestyle and long-range quadcopters, delivering massive burst power and throttle stability with minimal voltage sag.

Extended 1800mAh Capacity: Offers extra flight endurance over standard 1350mAh packs, allowing longer flight sessions while maintaining high performance.

6S 22.2V High-Voltage Output: Configured with six high-density lithium-polymer cells in series (25.2V peak) to drive high-KV brushless motors efficiently.

Factory Pre-Wired XT60 Connector: Fitted with a durable, high-conductivity XT60 female main power plug for low internal resistance and peak electrical throughput.

Integrated 6S JST-XH Balance Lead: Features a standard 6S JST-XH multi-pin balance plug for precision cell voltage monitoring and safe balance charging.

Durable Soft-Pack Sleeve Construction: Wrapped in a tough heat-shrink outer jacket designed to protect internal cells from hard landing impacts and battery strap wear.

Housing Style: High-density lithium polymer cell stack with protective heat-shrink sleeve.

Contact & Wire Material: High-flex silicone-insulated copper leads; gold-plated brass XT60 contacts.

Technical Specifications:

Capacity: 1800mAh.

Configuration: 6S1P / 22.2V Nominal / 25.2V Peak.

Discharge Rating: 120C Continuous.

Main Connector: XT60 Female.

Balance Connector: JST-XH 6S.

Color: Black / Orange U2 Series livery.

Usage Advice: Charge exclusively on "LiPo Balance" mode using a quality LiPo balance charger. Never discharge individual cells below 3.2V (19.2V total pack voltage) to prevent permanent battery damage.

Maintenance: Always store at storage voltage (3.8V–3.85V per cell) inside a fireproof LiPo safety bag when not in active use.

Essential Long-Endurance 6S FPV Battery: Position as the ultimate 6S power pack for freestyle drone pilots and mid-to-long-range FPV flyers who need extra flight time without sacrificing 120C burst throttle power.

Highlight Plug-and-Play Setup: Emphasize the pre-attached XT60 connector and flexible multi-strand silicone lead wire that allow direct setup on standard drone build power pads.

Recommended Cross-Sell Add-ons: Pair with 22.2V 1350mAh 200C 6S FPV UPSN Series LiPo Battery, 22.2V 2200mAh 75C 6S LiPo Battery Pack XT60, 22.2V 5200mAh 35C 6S LiPo Battery Pack XT60, and JST-XH 6S 22AWG Extension 20cm.

Featured Collection Hero: Display prominently on your 6 Cell Li-ion Battery Pack (22.2V~25.2V) collection page under high-performance 6S FPV packs.